Job Postings

If you are an employer in Auburn and would like to post your job opening(s) here, please send the job title and a brief job description with link for applying to Dr. Amy Brabham, Director of Workforce Development, [email protected].

If you are a job seeker and would like to send us your resume, please email it to us at [email protected].

2A USA, Inc.

An Italian based automotive die casting and machining company making aluminum parts for the automotive industry.

Die-Cast Tooling & Maintenance Technician: Responsible for Building and repairing all types, sizes, and shapes of jigs, fixtures, tools, and dies. Assemble and test complex tools and dies on manufacturing floor equipment; The candidate should be able to read and interpret blueprints; Operate and set-up all tool room equipment; Operate hand and small power tools; Assembles jigs, fixtures, tools, and dies; Set-up, and test dies to produce to product specifications; Investigate die cause/effect issues and make appropriate corrections; Provide and assist with set-up and modification of tools and on proper dies for production machines; May work with product designers providing input to manufacturing capability on new product lines; Responsible for troubleshooting, upkeep, preventive maintenance, making and continuous improvement of various tools, dies, jigs, and fixtures in an automotive stamping; Committed involvement with quality, cost savings, and continuous tool, die and mechanical improvements; Any other duties deemed necessary or appropriate including but not limited to die setting as required; Sets up and operates machine tools such as lathes, milling machine, shaper, and grinder, to machine parts, and verifies conformance of machined parts to specifications; Verifies dimensions, alignments, and clearances on tooling and mold spare parts; Examines standard or previously used dies, tools, and jigs and fixtures, and recommends design modifications regarding construction and function of part; All other duties as assigned by the tooling manager, die-cast manager, and/or plant manager.For more info or to apply, email resume to [email protected].

High Pressure Die-Cast Process Technician: Responsibilities: Stabilize, improve and standardize the existing HPDC processes, with the goal of reducing the scraps and improving the efficiency; Melting furnaces (how to tune them, clean them, degas the alloy and properly maintain them); Degassing of the alloy (how to tune them, clean them, degas the alloy and properly maintain them); Holding furnaces (how to tune them, clean them, degas the alloy and properly maintain them); Diecasting machines: program and optimize the parameters, optimize the runners, optimize the thermal systems by using the thermal camera, program and optimize the spraying, program and optimize the extracting robot, optimize the quenching; Trimming machines: program and optimize the parameters; Prepare the requests for the optimizations/modifications of the dies; Participate in the choice of new investments; Respond to immediate die casting concerns, as necessary; Responsible of performing continuous improvement activities and developing ideas on scrap reduction; Document any problems/occurrences related to die cast process control on the running history problems report and work through to resolve the problems and establish stability in the process; Responsible for process development and continuous improvement to reduce cycle times, die lubrication, scrap, etc.; Manage the development of new products and processes being launched to die casting. To apply, email resume to: [email protected].

Manufacturing Tech - Machining: Uses technical knowledge to troubleshoot and repair plant production CNC equipment. Performs duties associated with the setup and repair of a variety of production equipment to produce quality products. Maintains structures, electrical systems, heating systems, plumbing, machine repair, hydraulics systems for a variety of equipment; Performs various machining or bench operations to alter and repair tools, dies, fixtures, jigs, gauges and guarding; Troubleshoots and repairs equipment; performs preventative maintenance; Responsible for statistical process charting, interpretation, and trend-analysis in order to perform process or equipment adjustments to bring parts into specification; Performs other duties as assigned. To apply, email resume to: [email protected].

ADS-TEC Energy

Develops and produces scalable lithium-ion battery storage and EV charging systems including IT management of the system.

No current listings

Aptar CSP Technologies

Headquartered in Auburn, Alabama, Aptar has six worldwide locations offering a full-service portfolio with customized solutions and expert support. Medical/Pharm manufacturing solutions to ensure product stability and extend shelf life or customized, end-to-end solutions for drug delivery systems.

WHO ARE WE

At Aptar, we use insights, design, engineering and science to create innovative packaging technologies that build brand value for our customers, and, in turn, make a meaningful difference in the lives, looks, health and homes of people around the world.

By continually bringing innovations to market every day that convert non-dispensing packaging into breakthrough product-dispensing systems, Aptar creates “a-ha moments” for its customers and their consumers and patients. These innovations give people better ways to put on their favorite fragrance, and kids the opportunity to pour ketchup without making a mess, and patients connected technologies that help them more easily adhere to treatment.

We have manufacturing facilities in North America, Europe, Asia and South America and over 13,000 dedicated employees in 18 different countries.

YOU SHOULD WORK HERE BECAUSE WE:

• Attract and develop high performing people
• Promote a diverse and inclusive work environment.
• Encourage growth by allowing people to make mistakes through an open and trusting environment.
• Invest in the development of employees through local, regional and global career opportunities.
• Contribute to the communities where we reside.

WHAT’S NEW WITH APTAR

• We have many new exciting positions open in Auburn!

WHAT WE OFFER:

• Competitive base salary and performance-based bonus plan.
• An Exciting, Diverse and value based working environment
• Award-winning Corporate University offering personal development and training opportunities.
• Innovative benefits plan that includes 401K plan, vacation, medical, dental, vision, life, disability, pet insurance, and generous maternity/paternity leave.

To view open positions and apply, please visit here.

Archangel Systems, Inc.

An award winning, ISO 9001:2015-certified business in Auburn, AL that develops, designs, and manufactures certified sensing and control systems for air- and ground-based applications

Electronics Technician: Please email resume to [email protected].

Arkal Automotive USA, Inc.

Founded in 1997 thermoplastic parts manufacturing to advance the possibilities of lightweight automotive parts design for the OEMs and Tier I automotive suppliers.

Dock Auditor (7am-3pm shift): Responsible for: Conducting quality inspections, and final release for conformance to company standards; Trains production personnel on Quality Alerts issued by the Quality Engineers; Conducts Layered Process Audits as required; Inspection work can include visual inspections, touch point inspection, or use of measuring equipment to define conformity of a part; Instructs and monitors as needed rework projects and/or sorting activities to help eliminate known defects (includes work such as deburring or replacing a component part); Quarantines non-conforming material and maintains records; Reports all non-conformances and quality related issues and their ongoing maintenance to the Quality Team Leader; Ensures that all work is carried out as per the Quality Management System ie: document control, CPK studies, SPC, etc.; Work under general supervision of the Quality Manager; Keeps records indicating results of part inspections; Follows environmental and safety regulations; Follows company regulations and maintains proper discipline at all times; Other duties as assigned by Production Manager and Quality Manager. To apply, please visit here.

Production Associate (HIRING for 2nd and 3rd shift): Duties and Responsibilities - Follow and understand work instructions; Use visual aid and limit samples; Inspect own work, identifies common defects such as: short shots, splay, flash, etc.; Removes non-conforming products from the production stream and places these items in reject bin; Uses correct packaging and quantity of parts per work instruction; Correctly starts and completes all production forms; Attaches proper bar code labels to the correct packaging; Is responsible for keeping a clean and organized work space; Works at different stations as production requires; Places all first off and fixture parts from previous shift into correct area; Completes rework on all parts requiring such at end of shift; Enlists the assistance of the production supervisor/team leader when any part is in question regarding quality; Enlists the assistance of the production supervisor/team leader when machine shuts down due to mechanical issue; Follows all health and safety requirements while performing his/her job; Ensures housekeeping responsibilities are performed each day; Ensure that safety responsibilities are performed each day; Wears proper PPE at all times; Submits all required paperwork to the production supervisor at the end of the shift; Follows safety, OSHA and organization policies and practices; Other duties as assigned by supervisor or manager. To apply, please visit here.

ATS Alabama Corporation

An automotive injection-molding company supporting the Tier and I and II auto supplier network.

No current listings

Auburn University Facilities

Auburn University’s Facilities Management division provides highly responsive and quality support services to build and maintain the university’s facilities, grounds, and infrastructure.

Career Connections: Career Connections is an 8-week summer program in which high school students (16-18 years old) work alongside Facilities Management Staff and learn about maintaining Auburn’s Campus. Students may work up to 40 hours a week for $12 an hour. Students will rotate through the different departments within Facilities Management and experience both shadowing and hands on work. Perks of participating in Career Connections include but are not limited to competitive pay, flexible hours, professional development workshops, and free Auburn Merchandise. Applications are due May 12. Apply here.

Briggs & Stratton

Headquartered in Milwaukee, Wisconsin, is the world’s largest producer of gasoline engines for outdoor power equipment, and is a leading designer, manufacturer and marketer of commercial lithium-ion batteries, power generation, pressure washer, lawn and garden, turf care and job site products.

Manufacturing Technician A: Uses advanced technical knowledge to troubleshoot and repair plant production equipment. Performs all duties associated with the setup of a variety of production equipment to produce quality products. For more info and to apply, visit here.

Manufacturing Technician B: Uses technical knowledge to troubleshoot and repair plant production equipment. Performs duties associated with the setup of a variety of production equipment to produce quality products. For more info and to apply, visit here.

Manufacturing Technician C: Uses basic technical knowledge to troubleshoot and repair plant production equipment. Performs duties associated with the setup of a variety of production equipment to produce quality products. For more info and to apply, visit here.

Production Operator: Performs a wide variety of production and assembly work functions. Job Responsibilities: Follows instruction cards and perform job tasks and responsibilities at various workstations; Performs quality checks to insure parts are meeting quality criteria; Uses gauges to perform quality checks and record results; Resets, re-starts, and performs minor adjustments to production equipment as directed; Performs required preventive equipment maintenance; Performs other duties as assigned. For more info and to apply, visit here.

Builders First Source Millwork Corporation

Custom builder of wooden doors, windows and Moldings for the construction industry.

Assembler I Door Assembly: Perform all job operations in a safe manner in accordance with company safety policies. Working with a team in a production setting, using hand and power tools to assemble door units according to customer orders Read work tickets of items to be assembled using product knowledge and reading skills. Assist in set up of machinery using work tickets for specified product line. Assemble materials for the production of the finished goods specified using work tickets, hand and power tools, air nail guns, and other automated equipment as needed. Pick and pull production material as needed. Load, unload, store, and package inventory as needed Inspect finished product for quality using product knowledge and work ticket. Report all damaged material to the shop supervisor so that it may be recorded, in order to maintain accurate inventory records. Mark damaged material with label supplied by the supervisor. Assist in the shop housekeeping i.e. sweeping, storing, and cleaning. To apply, please send resume to [email protected].

Material Handler I: Operates forklifts, pallet jacks, and other machinery to move items, or signals machine operators to move materials onto and off trucks and loading docks. Pick and pull production inventory as needed. Keeps inventory, loading areas, and machinery clean. Open containers, sort, and catalog materials. Learns and adheres to workplace safety regulations. To apply, please send resume to [email protected].

Receiving Clerk: A Receiving Clerk receives and unpacks delivery shipments and compares packing lists to purchase orders, ensuring accurate deliveries. Package products that may be returned to vendor. Removes packing materials or stock items from inventory. Checks for discrepancies between shipped vendor product and company purchase orders. Returns incorrect / defective product as needed. To apply, please send resume to [email protected].

Shipping Clerk: Manages the shipment and receipt of all products, materials, and supplies. Collaborates and communicates with logistics technicians, customer service representatives, service providers, and others involved in the shipment and receipt of products. To apply, please send resume to [email protected].

CNJ, Inc.

Machines and cuts disc brakes for the automotive industry.

No current listings

Coachcomm, LLC

Innovates, designs, and assembles industry-leading communications systems for sports teams and other industry applications.

Associate Production Manager (APM): Serves as product and project support for the product management team. The APM will be familiar with the product’s user experience and help ensure it falls within the desired operation. The APM will execute day-to-day product-related tasks such as assisting product management with new product introduction (NPI) functions for new products, maintaining accurate product SKU details, qualifying new parts and products, reviewing product material and documentation, and supporting implementation efforts into Operations. In addition, the APM will assist Product Management with review and prioritization of outstanding product issues and often communicate directly with engineering leads on those issues. When executing NPI-related functions, the APM must possess a bias-for-action and the work with development, operations, management teams, and assist in direct customer interaction to ensure successful development and implementation of products. Primary Responsibilities: Serve as a subject matter expert on a range of products providing internal support to the other departments; Conduct product-related tasks associated with completing organization’s NPI efforts; Maintain product (SKU) records via PM database and other downstream applications; coordinate updates (ECOs) to those records as necessary; Assist in development of new products and enhancement of existing products; Assist in product market research and competitive analysis; Periodically assist in gathering direct customer feedback; Contribute to the review of product documentation; Create and update product issues accordingly in Jira Software; Provide internal or external product support when necessary; Provide training to employees or customers on product operation when necessary; Prepare and/or conduct product demonstrations. Applicants should email a resume/work history to [email protected].

Customer Service Representative: The CoachComm Customer Service Representative works with both external and internal customers to fulfill their expectations for the effective and successful use of our communication systems. Primary Responsibilities: Manage critical customer calls to Service and Support; Answer telephone calls; Respond to e-mails and take needed action; Troubleshoot basic set-up issues; Enter purchase orders; File completed service orders; Call on customers for return of equipment or payment of invoices; Update customer records in database systems; Generate extended warranty quotes; Issue Return Merchandise Authorizations and shipping labels to customers for service repairs; Work week-end or after-hours shifts as needed; Other duties as assigned to ensure that our customers’ needs and expectations are fulfilled. Applicants should email a resume/work history to [email protected].

Electronic Service Technician (1): Maintains, tests and repairs a wide variety of electronic equipment to the component level. Must have an in-depth knowledge of general advanced electronics analog and digital theory and specific knowledge of Audio, Video and RF principles. Must be able to work independently and rely on knowledge, experience and judgment to diagnose, interpret and repair all forms of in-depth electronic equipment and systems. Performs a variety of complicated tasks. A wide degree of creativity and latitude is required. May require some overtime. May require some on call duties. 80% - Maintain, test and repair a wide variety of electronic equipment to the component level. Typical equipment would be wireless audio, hardwired intercom, digital wireless control, video controllers, video decks and other analog and digital equipment; 10% - Interface with product development team to provide product feedback and make design modification requests; 5% - complete associated repair and parts inventory tracking paperwork for billing and ordering purposes; 5% - General administrative tasks as necessary. Pay range is $20 - $27.50. Applicants should email a resume/work history to [email protected].

Firmware Engineer: This position creates and develops design concepts for PCB-based embedded electronic equipment. May work individually or as part of a multi-disciplinary team, and may direct the work of others. We seek someone with at least a Bachelor’s degree in Electrical or Computer/Software Engineering, and 5 – 10 years’ experience in hands-on design and troubleshooting. A great position for your move or return to Auburn! Applicants should email a resume/work history to [email protected].

IT Support Tech (2): Installs, maintains, tests, and repairs systems and networks. Utilizes basic technical knowledge to support IT initiatives and provide first-level technical information systems support to the CoachComm employees. Resolves routine technical problems. Duties and responsibilities: Performs basic problem solving and assistance on various software applications and hardware systems for department users; Provide individual instruction and/or training to users on new or updated technologies; Performs routine technical assistance and maintenance duties; Maintains and updates record keeping system; may document projects and maintain user instructions; Assists with tracking inventory levels of equipment and materials; performs data entry and maintenance of records such as, but not limited to, project documents, user instructions, general reports and/or systems errors; Performs routine technological systems support, maintenance, and testing for proper upkeep of systems; troubleshoots and resolves general system hardware, software, and network failures and conflicts; Assists with the review, evaluation and recommendation of solutions relating to hardware and software acquisitions and/or network updates; Assists with research and development initiatives and in the implementation of new technologies; Assists with the implementation of technology projects with moderate scope and impact; Assists with the installation, configuration and maintenance of computers, workstations and/or other related equipment and devices; Performs miscellaneous job-related duties as assigned. Hours for this position are flexible. Applicants should email a resume/work history to [email protected].

Sales Development Specialist - CrewPlex: This individual will provide product expertise on CrewPlex products to end-users, dealers, and manufacturer rep groups. You will be responsible for driving demand for CrewPlex products in the early stages of user engagement and play a pivotal role throughout the entire sales process. Primary Responsibilities: Make outbound cold calls to end-users to generate leads for dealer/distribution networks and Crewplex sales team; Build end-user databases that can be used with connect and sale platforms; Coordinate field demonstrations for dealers, manufacturers rep groups, and CrewPlex sales team; Assist CrewPlex sales team and manufacturers rep groups with quoting end-users and dealers; Provide local and regional product demonstrations when needed; Respond to all incoming phone calls and web inquiries; Attend local and regional tradeshows and dealer events as needed; Own initial tradeshow outreach; Use company Customer Relationship Management system to fully document, track, record, follow up, and capture all related sales activity in a timely and accurate manner; Work in conjunction with Business Development Manager and Regional Sales team to prioritize field sales needs; Provide virtual training to end-users, dealer networks, as well as, independent sales groups when needed; Perform all other duties as assigned by management in a professional and efficient manner. Applicants should email a resume/work history to [email protected].

Test Technician: This position will be located in our Auburn, AL corporate office. The Test Technician will possess strong organizational and problem-solving skills and have the ability to execute thorough evaluations of product features, supplying the engineering team with important information to resolve issues quickly and completely. Outlined Tasks and Responsibilities: Design and perform test plans; Design and execute long-term and automated tests; Use and/or develop validation tools; Use tools to load and test incremental firmware builds; Keep organized/detailed list of test actions; Report issues timely and concisely, communicating fine details thoroughly; Work closely with and take direction from the engineering team; Assess priorities and reallocate resources daily. Applicants should email a resume/work history to [email protected].

Daewon America, Inc.

Develops metal springs necessary for the automotive industry using a metal stamping process.

No current listings

Donaldson Company, Inc.

Performs welding, metal forming and painting functions for exhaust and after treatment systems using filtration technologies and processes.

EHS Manager: Responsibilities: Leads the implementation and maintenance of EHS risk assessment tools designed to identify, prioritize and control exposures to health and safety hazards or environmental impacts that can result in harm to people, property, or the environment; Leads the creation of annual, environmental, health and safety targets and objectives for the site to measurably reduce exposure to the site’s most significant health and safety risks and environmental impacts; Identifies action-based EHS goals for site leadership team members and supervisors to support achievement of site-specific EHS targets and objectives; Leads the post incident review of high-consequence EHS incidents and ensures that corrective and preventive actions addressing root causes are effectively deployed; Develops and maintains site-specific compliance assurance processes to facilitate the prompt completion of EHS-related compliance, training and preventive maintenance obligations; Leads the deployment of employee-directed environmental, health and safety teams and facilitates their engagement in ownership of the activities that enable a compliant, incident-free workplace while reducing the site’s environmental footprint; Manages development and maintenance of training processes to ensure that required environmental, health and safety training is defined, addresses required content and is tracked to completion; Coordinates utilization of Donaldson’s change management process to evaluate potential health and safety hazards and environmental impacts associated with business activity changes. May provide functional advice or training to other company locations. To apply visit here.

Welder (1st shift): Performs Mig and Tig welding processes; Makes adjustments on welding machine settings as required to maintain a quality weld; Performs setups and changeovers for departments in a safe, efficient, and timely manner; Change tips, weld liner, nozzle, wire, and torch; Trouble shoots weld problems; Must be a self-starter; Perform other tasks as needed; May rotate to other departments as needed to operate a variety of equipment; Complies with all EHS, DOT, HAZMAT and environmental policies and procedures; Uses all designated Personal Protective Equipment as required. May be required to wear PAPR; Interprets part prints, specifications, production orders, and troubleshoots equipment; Completes daily inspections and cleaning of machines and work areas; Utilize route sheets and blueprints as needed to produce parts accordingly; Must be able to work scheduled overtime hours. To apply visit here.

Donghee America, Inc.

An automotive injection molding company creating parts for OEMs and Tier I and II companies.

Maintenance Technicians: Monitor blow molding and/or welding process and maintain all related equipment; Perform any required repairs and maintenance on all production and utilities related equipment; Record all downtime and/or parts used on scheduled or non-scheduled work orders; Perform preventative maintenance per scheduled work orders and written procedures; Perform all duties with safety as a high priority. To apply, please email resume to: [email protected].

Process Technician: Essential duties and responsibilities: Assist production in maintaining the production process by ensuring the proper use of the downline and associated equipment through repeatability, procedures, etc.; Oversee and coordinate suggested improvements to the process and/or associated equipment; Assist in the design of downlines and associated equipment used in the production process; Assist Maintenance Technician, if required, to keep production from stopping; Monitor blow molding and/or welding process and maintain all related equipment; Collect data and maintain logs on all aspects of the production process; Hours: 6pm-6am (Monday-Friday and weekends); To apply, please email resume to: [email protected].

Production Specialist: Essential duties and responsibilities: Hold daily team meetings and ensure that personnel are assigned to appropriate work stations as necessary; Ensure that all Team Members are qualified to perform the assigned duties; Identify manpower requirements for the shift; Perform employee evaluations and counsel employees as required; Study downtime data and ensure all downtime is accurately recorded; Possess excellent Excel and computer skills. To apply, please email resume to: [email protected].

Shipping Clerk (2 Openings): Essential duties and responsibilities: Handle incoming and outgoing shipments by checking them physically; Check products for defects and accuracy; Ensure posting of outbound deliveries using pre-designed software; Pull, pack, and ship finished goods; Prepare and paste labels on shipments; Prepare invoices and delivery orders; Ability to drive a forklift; Hours: 6am – 6pm and 6pm -6am (Monday – Friday/some weekends). To apply, please email resume to: [email protected].

East Alabama Medical Center - EAMC (Auburn Location)

Auburn Emergency Services location developed in The Park in Auburn. Medical and support positions available to provide operation for the new location.

See flyer here for open positions.

East Alabama Medical Center - EAMC (Opelika Location)

Full-time Pharmacist: Pharmacists play an integral role in the health care team at EAMC. Pharmacists ensure the safe and effective use of medication, facilitate the medication reconciliation process, and work closely within a multidisciplinary team to ensure the best care is provided to patients. We offer many innovative services and programs that help develop and grow our employees throughout their careers. Questions? Email Crystal Russell at [email protected] or call 334-528-4381. Interested? Apply now here.

Part-time Pharmacist: Pharmacists play an integral role in the health care team at EAMC. Pharmacists ensure the safe and effective use of medication, facilitate the medication reconciliation process, and work closely within a multidisciplinary team to ensure the best care is provided to patients. We offer many innovative services and programs that help develop and grow our employees throughout their careers. Questions? Email Crystal Russell at [email protected] or call 334-528-4381. Interested? Apply now here.

Environmental Resource Analysts, Inc.

An industry leader in the Southeast United States for testing of various products.

Toxicity Lab Manager: ERA, a full service Environmental Testing laboratory, is seeking a Toxicity Laboratory Manager. The job duties would include but not be limited to: scheduling client tests according to testing availability, communicating with clients concerning analytical results, scheduling staff to accommodate the necessary daily tasks, aiding in the daily tasks, reviewing paperwork for completeness and submitting to secondary data reviewer, reviewing and suggesting changes for Toxicity laboratory quality system documents including SOPs and benchsheets, and tasks as needed. The position is Monday - Friday 8-5, but may require occasional weekend and holiday work. Candidates with a science background and management are preferred. To apply, please email resume to [email protected].

FetchMe Delivery - Auburn & Opelika

A delivery service partnered with local clients located in the Auburn Center for Developing Industries (ACDI) incubator buildings.

Fetcher (Delivery Driver): Come join our team and help us continue to be the best delivery service in town! We are looking for enthusiastic, hard-working folks to help connect the people of Auburn and Opelika one delivery at a time. Whether you are looking for full-time work or just some extra cash, we have several open positions for both day and nighttime drivers. You create your own schedule and work based on your availability. Requirements: must be 18+ years old, possess valid driver's license and automotive insurance with good driving record, minimum 1 year driving experience. Previous delivery driver or other service industry experience preferred. Simply head to fetchmedelivery.com/drivers or call us at 334-209-7730 to submit your application and schedule an interview!

GE Aerospace

An additive manufacturing facility developing parts for aerospace applications all over the world.

Administrative Assistant: Essential Responsibilities: In this role, you will work with limited Supervision, meet day-to-day short-term objectives, and provide direct support to the salaried and hourly team. As the Administrative Assistant, you will support the site with: Payroll; New hire on boarding documentation + support; Ex: Interview scheduling, paperwork requirements; Procurement support (ex: office consumables / common attire); Employee engagement focal; Clerical and administrative support to site; Ex: Training completions (EHS + Quality), Contractor screening. To apply, visit here.

Engineering Co-op: Help invent the future of flight, lift people up, and bring them home safely as a GE Aviation Auburn intern/co-op! You’ll build leadership and functional skills in a supply chain/manufacturing role working on challenging, real-world problems and solve for what the world needs. You’ll build relationships with interns/co-ops and leaders. And you’ll prepare for a potential full-time position after graduation into one of our amazing leadership programs or a direct hire opportunity. Innovative ideas would never see the light of day without a dedicated team to deliver them. At the Aviation Auburn site you will experience cutting-edge technology in a culture of continuous improvement to deliver the highest quality products to our customers. Members of our team are part of a fast-paced and dynamic environment and typically have the benefit of getting hands-on experience with our products. Experiences may include: Exposure to state of-the-art methods of manufacturing including Additive manufacturing and Turbine blade manufacturing; Maintaining high quality standards via risk assessment, root cause analysis, corrective action, and the application of statistical controls; Ensuring safe work conditions via Environmental, Health & Safety (EHS) initiatives; Applying Lean and Six Sigma principles to drive productivity, on time delivery, process capability, and stable operations in our increasingly complex and demanding environment; Supporting delivery efforts for sourced components by working with our GE shops and suppliers while building project management skills, negotiation skills, and business acumen. To apply, visit here.

Lean Coach: The Auburn Turbine Airfoils facility has been on an exciting lean transformation journey over the last 4 years! The Lean Coach will play an integral role in executing the site's lean transformation strategy to achieving a 10-day blade, 0 defects, 100% on time. This role will partner with the organization leadership team at all levels of the facility to drive product flow and process improvements that deliver lead time reductions and maximize cash flow, and act as a coach for the site to continue to improve our lean culture. Essential Responsibilities: The Lean Coach guides the facility through the Lean journey, providing ongoing teaching and coaching of lean principles, theories, practices and drives ownership and adoption; Coach and transfer knowledge by working side-by-side with all levels of the organization to develop behaviors that build a culture of engagement, daily problem-solving, and respect for people; Lead a Value Stream using lean tools and process such as: Process mapping and Kaizen Events to identify waste, understand gaps, and coach participants to experiment and implement improvements that deliver breakthrough results; Facilitate creation and sustainment of daily management system activities; Facilitate all aspects of Kaizen Events including leading prep and post event activities, genba walks, to ensure readiness and sustainment; Use a hands-on approach to provide leadership and guidance to all Asheville employees on Business Transformation and its application; Lead projects and provide value as an individual contributor; Have a basic understanding of key business drivers; use this understanding to accomplish own work. Have a good understanding of how work of own team integrates with other teams and contributes to the area; Have some autonomy to make decisions within a defined framework. Resolve issues in situations that require good technical knowledge and judgment within established procedures. Consult more senior team members for issues outside of defined instructions/parameters; A job at this level requires good interpersonal skills and may be required to lead a junior team. Develops strong servant leadership skills. Ability to explain technical information at all levels. To apply, visit here.

Manufacturing Associate: Assigned to work within teams as a machine operator. As a machine operator you will set-up and operate a variety of machines performing a wide variety of machining operations on aircraft engine turbine blades and other materials, parts and assemblies. Essential responsibilities: Operators will be assigned to work teams; Individuals will be required to actively participate in teams and committee; Attendance at team and committee meetings will be required; Individuals will need to apply this training to work within the teams and constantly strive to improve operation and cycle time. This will include the completion of Six Sigma and Lean projects; Operators will learn to operate every workstation and operation in the facility. Job assignments may be rotated on a daily basis; Operators will be asked to use their creativity to design, build, and assemble carts, trays, stands, and other equipment to support workstation tooling and equipment; Operators will be used to perform complicated layout operations to verify part dimensions; Operators will also be asked to operate tools and equipment ranging in size from small to large and in complexity from simple to very complicated; Perform assembly and disassembly of parts as required to machine, etc., and perform other related duties; Operators can be asked to perform other related duties, when necessary. To apply, visit here.

Goodwill Southern Rivers

Career Center Specialist: The Career Center Specialist is responsible for coordinating the day-to-day activities within the Goodwill Industries of the Southern Rivers (GoodwillSR) career center with the focus of assisting and providing resources to individuals who are unemployed or underemployed. The career center with the focus of assisting and providing resources to individuals who are unemployed or underemployed. The Career Center Specialist has excellent verbal and written communication skills and has the ability to quickly and effectively develop a rapport with a wide variety of audiences. Responsibilities include aiding individuals with resources available in the career center and community, setting up class schedules, and implementing initiatives that are designed to positively impact and enhance the job search and employability skills of career center clients. Essential functions include: Greet and engage visitors and callers professionally and warmly. Perform general reception services, including answering telephones and taking messages; Coordinate the production and distribution of MailChimp emails and maintain contact list; Obtain client information and track it appropriately in the organization’s client management system; Maintain familiarity with the resources that the career center provides as well as community resources; Assist clients with using the career center’s resources; answer questions and give appropriate guidance; Support opportunities to market and promote Career Center services to local employers, social service agencies and government entities; Coordinate and/or contribute to the career center’s services, events, and programs; Contribute to the development and facilitation of Career Center orientation and classes; Assist in scheduling of classes, setting up internal interviews, and reserving training and interview rooms; Refer clients to other Goodwill SR programs and partner resources as appropriate; Assist with data entry to add information to the client management system for client contact, retention calls, class attendance, etc.; Perform filing, photocopying, mass mailings and other related activities; Conduct telephone surveys, retention phone calls, and client outreach calls; Work collectively with the center’s other team members to advertise and promote job openings, financial services, and more to clients; Ensure safe operations of equipment and facility by following and communicating safety standards; Actively participate in work groups as assigned. To apply, visit here.

Gummoon USA, LLC

Provides injection molding parts for Tier I and II companies.

No current listings

ID Plastics, L.P.

Developed an IDPack system of injection molded resuable packing for various manufacturing applications.

Process Technician I: Responsibilities include: Setup the production equipment and supplies before executing the job orders; Operate equipment safely and effectively for production processing; Ensure that equipment is maintained in good and safe working condition; Inspect equipment to identify any replacements, malfunctions, and repairs; Perform regular equipment maintenance to ensure production capacity and quality; Identifying machine faults and production rate errors; Monitor and adjust machine parameters; Quality assurance measures: testing according to test protocols and quality control; Process documentation and documentation of process changes; Aid junior operators in their assigned responsibilities; Repair and clean the equipment when needed; Can work independently or with a teammate to perform and complete the assigned duties in timely manner; Evaluate equipment performance and recommend improvements; Operate trucks and other industrial vehicles to transfer the production equipment between warehouse and working area; Follow safety procedures and company policies for equipment operation; Recommend process improvements to enhance operational efficiency and safety; Contribute to waste management programs; Identify and report unsafe operations to Supervisor/Management immediately; Maintain the work area clean, safe, and organized; Ensuring a safe working environment; Performs other duties as requested by Supervisor/Department Manager/Team Lead. To apply, email resume to Laurie Pearce: [email protected] or [email protected]

Production Operator: Responsibilities include: Setup the production equipment and supplies before executing the job orders; Operate equipment safely and effectively for production processing; Assembly and inspection of in process components; Ensure that equipment is maintained in good and safe working condition; Inspect equipment to identify any replacements, malfunctions, and repairs; Clean the equipment when needed; Work under the guidance of Supervisor to perform and complete the assigned duties in timely manner; Evaluate equipment performance and recommend improvements; Operate trucks and other industrial vehicles to transfer the production equipment between warehouse and working area; Follow safety procedures and company policies for equipment operation; Recommend process improvements to enhance operational efficiency and safety; Contribute to waste management programs; Identify and report unsafe operations to Supervisor immediately; Maintain the work area clean, safe, and organized; Ensuring a safe working environment; Performs other duties as requested by Supervisor/Department Manager/Team Lead. To apply, email resume to Laurie Pearce: [email protected] or [email protected]

Intramicron, Inc.

An engineering technology development and manufacturing company that serves the aerospace, chemicals, defense, and energy sectors.

No current listings

I-PEX USA Manufacturing, Inc.

Manufactures injection molding parts for the automotive industry.

Jr. Engineer: Must understand and follow ISO9001 and IATF16949 systems; Troubleshoots process problems and identifies solutions which reduce downtime and conserve maintenance costs; Measurement of product; Train production technician; Create training procedures such as troubleshoot, maintenance, measurement, and training video; Monitors process equipment to identify potential errors and develops solutions to eliminate the reoccurrence of those problems; Develops and updates process procedures to ensure that documentation is accurate and understandable; Determines the test methods, procedures, parts, and equipment needed to implement engineering changes; Identifies and resolves problems in a timely manner by gathering and analyzing information and developing solutions; Project Management - completes projects on time and budget; Looks for ways to improve and promote quality; Follows policies and procedures; Observes safety and security procedures. Reports potentially unsafe conditions; Responsible for keeping work area clean and organized; Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed. To apply, email resume to Tasha Smith: [email protected] or call (334) 321-0653.

Maintenance Technician: Installs, maintains, and repairs machinery, equipment, physical structures, pipes, and electrical systems in facility. Provide assistance to fellow team members as required; Essential Duties and Responsibilities; Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions; Must understand and follow ISO9001 and IATF16949 systems; Visually inspects and tests machinery and equipment; Listens for unusual sounds from machines or equipment to detect malfunction and discusses machine operation variations with supervisors, engineers, operators, or other maintenance workers to diagnose problem and to repair machine; Dismantles defective machines and equipment and installs new or repaired parts; Cleans and lubricates shafts, bearings, gears, and other parts of machinery; Installs and repairs electrical apparatus, such as transformers and wiring, and electrical and electronic components of machinery and equipment; Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment; Repairs and maintains physical structure of establishment; Installs, programs, or repairs automated machinery and equipment such as robots or programmable controllers; Fabricates and repairs counters, benches, partitions, and other wooden structures; Conducts regularly scheduled preventive maintenance on all auxiliary equipment and molding machinery and documents the results; Responsible for working safely and following safety procedures and policies. Reports potentially unsafe conditions; Responsible for keeping work area clean and organized; Create and maintain written information concerning preventive maintenance and repairs to machinery. Maintain a log of machine downtime to include what happened, why, what caused the down time or problem and how was resolved. Presents numerical data effectively; The Maintenance Technician must be trained and understand IATF guidelines and must follow the IATF guidelines to confirm that all equipment and processes meet the IATF standards; Makes suggestions on how to work more efficiently and effectively; Follows policies and procedures; Meets productivity standards. Completes work in timely manner. Strives to increase productivity. Works quickly; All paperwork pertaining to maintenance must be completed in a timely manner; Works well under production pressures; Read and follow work instructions; Regular and predictable attendance; Must work the days and hours necessary to perform all assigned responsibilities and tasks; Perform other related duties as assigned. To apply, email resume to Tasha Smith: [email protected] or call (334) 321-0653.

Material Handler: Maintains production incoming and outgoing packaging and shipping supplies. Prepares items for shipment by performing the following duties; Essential Duties and Responsibilities include the following. Other duties may be assigned; Compares identifying information and counts, weighs, or measures items of incoming and outgoing shipments to verify information against bills of lading, invoices, orders, or other records; Affixes shipping labels on packed cartons or stencils identifying shipping information on cartons; Stamps, stencils, or glues identifying information and shipping instructions onto crates or containers; Unpacks and examines incoming shipments, rejects damaged items, records shortages, and corresponds with production supervision of any problems noted; Examines outgoing shipments to ensure shipments meet specifications; Sets up labels, bags, boxes and other shipping containers for production personnel and ensures supply materials are maintained; Operates forklift truck or uses hand truck to move, convey, or hoist shipments from production area to shipping and receiving platform; Responsible for keeping production packaging areas, warehouse, and outside dock clean and organized; Looks for ways to improve and promote quality; Follows policies and procedures; Responsible for keeping work area clean and organized. To apply, email resume to Tasha Smith: [email protected] or call (334) 321-0653.

Mold Maintenance: Essential Duties and Responsibilities include the following. Other duties may be assigned as necessary; Must understand and follow TS16949 and IATF16949 systems; The Mold Maintenance Technician is responsible for disassembling molds to perform preventive maintenance (cleaning, greasing, etc.); The Mold Maintenance Technician is responsible for correct assembly of molds after cleaning and greasing; The Mold Maintenance Technician is responsible for using crane in pulling mold or components from machine and placing in mold shop; The Mold Maintenance Technician is responsible for placing mold or components into molding machine and hooking up water or oil lines to molds; There are times the Mold Maintenance Technician will grease the mold and mold components in the machine; The Mold Maintenance Technician will follow all procedures and rules on their shift; The Mold Maintenance Technician is responsible for helping to analyze if mold or process condition is causing bad parts; The Mold Maintenance Technician is responsible for completing check sheets and other paperwork required in the mold shop; The Mold Maintenance Technician is responsible for correct assembly of molds when overhaul takes place; The Mold Maintenance Technician is responsible for correctly installing the mold, hooking up water /oil lines and hooking up hot-runner during changeovers; Interfaces with other team members in the organization to ensure customer deadlines are met; Helps maintain tooling records and documents; The Mold Maintenance Technicians must be trained and understand IATF guidelines and must follow the IATF guidelines to ensure mold conditions produce quality product that meet our customer demands; Regular and predictable attendance; The ability to complete an assigned task in a safe manner and in a constant state of alertness and must understand and follow all safety rules; Must be able to work in a cooperative manner with co-workers, other supervisors, and others on Company premises; Work well under production pressures; Read and follow work instructions; Follows policies and procedures; Observes safety and security procedures. Reports potentially unsafe conditions; Responsible for keeping work area clean and organized; Must work the days and hours necessary to perform all assigned responsibilities and tasks; Perform other related duties as assigned. To apply, email resume to Tasha Smith: [email protected] or call (334) 321-0653.

Production Control Coordinator: Plans and prepares production schedules for manufacturing based on customer demands and sales forecasts to ensure that material supply is sufficient for production demand taking corrective action when needed. The work is directly related to the management or general business operations of IUM and primary duty includes the exercise of discretion and independent judgment with respect to matters of significance including the ability to make significant decisions that directly affect financial affairs and profitability of the company. Must understand and follow ISO 9001:2015 and IATF 16949:2016 systems; Draws up master schedule to establish sequence and lead time of each operation to meet shipping dates according to sales forecasts or customer orders; Plans sequence of fabrication, assembly, inspection and other manufacturing operations for guidance of production workers; Confers with department supervisors to determine status of assigned projects; Expedites operations that delay schedules and alters schedules to meet unforeseen conditions; Prepares production reports; Responsible for resolving shipping/receiving problems and issues; Works with President, Manager’s and Supervisor’s to plan and schedule work flow for each department and operation according to previously established manufacturing sequences and lead times; Looks for ways to improve and promote quality; Follows company policies and procedures; Observes safety and security procedures. Reports potentially unsafe conditions; Responsible for keeping work area clean and organized; Flexibility to work in a variety of jobs; Regular and predictable attendance; The ability to complete an assigned task in a safe manner and in a constant state of alertness and must understand and follow all safety rules; Must be able to work in a cooperative manner with co-workers, supervisors, and others on Company premises; Work well under pressures; Read and follow work instructions; Perform repetitive work; Must work the days and hours necessary to perform all assigned responsibilities and tasks. Must be available (especially during regular business hours or shifts) to communicate with co-workers, supervisors, clients, vendors and any other person or organization with whom interaction is required to accomplish work and project goals; Performs other related duties as required. (Purchasing, SAP and Shipping are examples) Cross training may be required. To apply, email resume to Tasha Smith: [email protected] or call (334) 321-0653.

Production Operator: Essential Duties and Responsibilities include the following: Other duties may be assigned; Must understand and follow TS16949 and IATF16949 systems; Conduct visual inspection of components manufactured and keep production record; Make sure all operator records are turned in from the previous shift; Gather start-up samples; Give start-up samples and paperwork to QE for inspection and review; Complete paperwork for the shift; Parts are to be randomly inspected during the shift to ensure product quality; Direct all quality questions or concerns to the technician or the supervisor; Maintain production data by completing necessary paperwork; Ensure that all paperwork is complete (Includes the scrap report.); Remain at the job station until relieved by the next shift operator; Assists co-workers and team members as needed; Flexibility to work in a variety of jobs; Regular and predictable attendance; The ability to complete an assigned task in a safe manner and in a constant state of alertness and must understand and follow all safety rules; Is responsible for communicating and assisting fellow team members; Post production numbers to white board on an hourly basis; Check the work area to ensure necessary supplies such as labels, bags and boxes are available; Looks for ways to improve and promote quality; Observe safety and security procedures and reports potentially unsafe conditions; Is responsible for keeping work area clean and organized; Must be able to work in a cooperative manner with co-workers, supervisors, and others on Company premises; Work well under production pressures; Read and follow work instructions; Follow company policies and procedures; Perform repetitive work; Must work the days and hours necessary to perform all assigned responsibilities and tasks. Must be available (especially during regular business hours or shifts) to communicate with co-workers, supervisors, clients, vendors and any other person or organization with whom interaction is required to accomplish work and project goals; Perform other related duties as required. To apply, email resume to Tasha Smith: [email protected] or call (334) 321-0653.

Quality Analyst: Must understand and follow ISO9001 and IATF16949 systems; Interprets engineering drawings, schematic diagrams, or formulas and confers with management or engineering staff to determine quality and reliability of standards; Selects products for tests at specified stages in production process, and tests products for variety of qualities to ensure that manufactured components meet or exceed customer expectations; Records test data, applying statistical quality control procedures; Evaluates data and writes reports to validate or indicate deviations from existing standards; Recommends modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability; Sets up and performs destructive and nondestructive tests on materials, parts, or products to measure performance, life, or material characteristics; Prepares graphs or charts of data or enters data into computer for analysis; Responsible for assisting I-PEX USA Manufacturing, Inc., with IATF implementation and on-going certification to include document control and quality procedures; Must be able to identify all the basic quality gauges and be able to use them. Example: height gage, force gage, micrometer, calipers, optical comparator, measuring microscope, jigs and pin gages; Must be able to perform basic gage calibration; Must be able to understand inspection standards; Operation and minor programming of CMM vision system; Identifies and resolves problems in a timely manner; Looks for ways to improve and promote quality; Perform other related duties as required. To apply, email resume to Tasha Smith: [email protected] or call (334) 321-0653.

Stitching Technician: Essential Duties and Responsibilities include the following. Other duties may be assigned; Must understand and follow TS16949 and IATF16949 systems; Check all materials (Housing, Terminals, Trays) to ensure accuracy before starting machines; Starts machines, engages feed and observes operation; Pulls lots off machines (Production lots collection); Change reels and replenish Housing and Trays; Relieve Junior Technicians as necessary; Inform QC of quality problems; Troubleshoot problems of all kinds and replace faulty part as necessary; Teach robot positions when they are out of alignment; Check up on machine conditions when quality problem occurs; Carry out changeover; Regular and predictable attendance; Keep work area clean, take out trash during each shift; Maintains paperwork through daily work logs; Observes safety and security procedures. Reports potentially unsafe conditions; Dispose of Terminal Scrap from beneath the machines; Performs other duties as assigned. To apply, email resume to Tasha Smith: [email protected] or call (334) 321-0653.

K.C. Sol-Tech, Inc.

Uses machining and fabrication to develop metal racks and pallets for various industries.

No current listings

KFTEC (Korea Fuel Tech America)

KFTEC makes eco-friendly automotive fuel parts, including carbon canisters for gasoline and hybrid automotive fuel systems that help reduce air emissions.

HR Manager: Responsible for coordinating all administrative activities related to an organization’s personnel. Their duties include developing recruitment strategies, implementing systems for managing staff benefits, payroll and behavior and onboarding new employees.

Safety Manager: In charge of making sure that employees follow health and safety regulations and supervising operations to promote the wellbeing of their team. Their duties include using safety research to create policies that eliminate workplace hazards, documenting accidents in the workplace and investigating the circumstances of an illness or injury.

KOAM, LLC

Engineer: To apply for this position, please visit here.

Fabricator: To apply for this position, please visit here.

Machine Shop Tech's: To apply for this position, please visit here.

Leehwa America, Inc.

An injection molding company providing polyurethane parts in the automotive industry.

No current listings

Leonard Peterson & Company, Inc.

Manufactures wood laboratory casework for construction goods.

Bookkeeper: Responsible for AR, AP, Payroll, and other tasks as assigned. We are looking for an experienced bookkeeper that is well versed in accounting principles. Knowledge of Great Plains software is plus. Must be honest, trustworthy, self-motivated to work individually. We are looking for dedicated individuals that desire to be trained to be part of our team. Essential duties and responsibilities: All other duties assigned; Print, match and enter AP invoices received daily; Reconcile monthly statements and rotate files yearly; Pay weekly and monthly invoices and file paperwork weekly; Enter AR invoices, issue credits, email vendors for collection, and prepare waivers; Check time, run payroll reports, generate payroll, and assemble pay envelopes; Enter deductions for Payroll, 401K, Insurance, and other deductions; Pay bi-weekly, monthly, and quarterly payroll and sales and use tax; Reconcile bank statements, credit card statements and order office supplies; Deposit checks, make bank transfers and upload files to the bank weekly; Prepare weekly reports for officers. To apply, e-mail resume to Teresa James: [email protected].

Cabinet Assembler: Seeking a Cabinet Assembler to join our team. A Cabinet Assembler assembles furniture parts to produce drawers, wall, and base cabinets. We are looking for dedicated individuals that desire to be trained to be part of our team. Essential Duties and Responsibilities: Read and comprehend instructions and follow established procedures; Align material and put together components to build cabinets; Operate machines to assemble components to specifications; The ability to lift, bend, push, pull, and move material; The ability to stand or walk and entire shift (8 to 10 hours); The ability to learn to read a tape measure, use handheld tools, including but not limited to sanders, clamps, staple guns, and power drills; Ability to lift and/or move up to 75lbs. occasionally. To apply, e-mail resume to Teresa James: [email protected].

Machine Operator: Seeking a Machine Operator to join our team. A Machine Operator sets up and operates different types of wood working machines such as CNC, banders, table saws, drill presses and other machinery to machine wood parts for custom cabinetry. We are looking for dedicated individuals that desire to be trained to be part of our team. To apply, e-mail resume to Teresa James: [email protected].

Receptionist: Seeking a receptionist to join our team. A receptionist greets people coming into Leonard Peterson’s facility, answers phones and transfers to the appropriate person, prepares bills of laden for shipments, and prepares invoices. We are looking for a dedicated individual that desires to be trained to be part of our team. Essential Duties and Responsibilities: Answers incoming phone calls and transfers to the appropriate person; Greets and directs incoming visitors to our facility; Takes incoming calls from employees and prepares absent reports; Prepares folders for each order that is received and emails acknowledgements of orders; Prepares all UPS shipping labels for outgoing shipments; Prepares bills of laden for all outgoing truck loads; Prepares invoices for all orders and sends them to the customer; Prepares weekly report of all sales and invoices; Opens and distributes all mail; Prepares wood samples for mailing to customers; Other duties as assigned. To apply, e-mail resume to Teresa James: [email protected].

Lotte Chemical Alabama Corporation

Manufactures long glass fiber thermoplastics for automotive, chemical and materials.

No current listings

MDT Armor Corporation

Customizes and assembles armored military vehicles for the aerospace and defense industries.

Automotive Tech: Please apply at www.indeed.com and search "MDT Armor."

Car Audio & Electronics Installer: Three years previous Automotive Electrical experience preferred; Automotive Electrical Certificate Preferred; Work with Basic Hand Tools and Small Electrical /Air Tools; Ability to follow Standard Operating Procedures; High School Diploma or equivalent required; Be able to lift 50 lbs; Overtime required; Employee required to supply their own tools; Strong background in car stereo installation preferred. Please apply at www.indeed.com and search "MDT Armor."

General Assembly: Job requirements - 2 years experience in industrial/manufacturing; Work with Basic Hand Tools and Small Electrical/Air Tools; Ability to follow Standard Operating Procedures; High School Diploma or Equivalent; Able to lift 50 lbs; Overtime; Supply own tools. Please apply at www.indeed.com and search "MDT Armor."

Industrial Sewer: Job requirements: Sew blankets consisting of Kevlar; Must be able to read tape measure; Able to lift, push and pull up to 50lbs. Please apply at www.indeed.com and search "MDT Armor."

Welder: Five years previous manual welding experience preferred; Welding certificate Preferred; Work with Basic Hand Tools and Small Electrical/Air Tools; Ability to follow Standard Operating Procedures; High School Diploma or equivalent required; Be able to Lift 50 lbs; Employee required to supply their own tools. Please apply at www.indeed.com and search "MDT Armor."

Nashville Wire Products Manufacturing Co., Inc.

Manufactures various wire form components for consumer goods.

Machine Operator Class 1, Class 2, Class 3 & Class 4: Read and understand engineering drawings. Set-up automatic or semi-automatic machine or process line in allotted time. Run automatic machine, process line, read tape measure, verify parts are produced to specifications. Works under moderate to little supervision. Previous manufacturing experience required. For Interested candidates, please email resume to: [email protected].

Set-Up Maker: Performs set-up for a variety of production machines to operate at output quality standards. Performs machine maintenance repairs, reads blueprints and copy prototypes for making set-ups. For Interested candidates, please email resume to: [email protected].

Tooling Lead: Designs and develops tools and machinery used to facilitate and optimize manufacturing processes. Reviews product design and build requirements to determine tooling concepts, design options, testing plans, and specifications. Utilizes CAD to create accurate, complete, and concise design models and documentation to fabricate tools. Estimates costs, resource requirements, and materials required for tools. Manages Tooling and Prototyping department personnel. For Interested candidates, please email resume to: [email protected].

PA Logic Solutions, LLC

The only independent, prescription Prior Authorization (PA) service provider in the United States. Our focus is on making the best clinical decisions for plan members while helping customers avoid unnecessary and high-cost drug spend.

Senior Software Developer (1): Primary responsibilities include: Design architectures, including the software, hardware and communications, to support the total requirements, as well as to provide for present and future cross-functional requirements and interfaces. Interact with project management to plan project schedules and technical direction. Provide quality assurance review and the evaluation of existing and new software products. Develop high-level system design diagrams for program design, coding, testing, debugging and documentation. Develop and implement moderate to complex web applications on one or more platforms. Test, code, and debug new software and make enhancements to existing software according to specs. Performance maintenance on existing software products. Assist in the development of user manuals. Plan and manage implementation and integration of new technologies. Solve highly technical and complex problems on multiple projects and provide consultative support to internal staff. Additional responsibilities include: Architect, Design, and Build applications for prescription Prior Authorization analysis and determination; Code Reviews; Bug Fixing; Unit testing applications during development; Integration Testing; Application Support; Application Deployments. To apply, visit careers at PA Logic Solutions.

Pyongsan America, Inc.

Assembles hoses and pipes for the automotive industry.

No current listings

Rausch & Pausch, L.P.

Provides automated assembly of solenoid valves for the automotive industry.

Assembly Operator 2nd Shift (3:00pm – 11:00pm): Performs machine operations to support the assembly of parts following posted work instructions; Responsible to ensure accuracy of their own work according to work instructions and monitor the quality of the product; Detects and reports defective and/or questionable product conditions to the department supervisor; Detects and reports any unsafe conditions to the department supervisor and/or Environmental, Health & Safety Leader; Maintains the work area and equipment in a clean, orderly condition and follows prescribed safety regulations; Responsible for workplace safety and adhere to all plant safety rules; Work with others in the team to maximize efficiency and reduce scrap/downtime on the production line; Other duties may be assigned for example but not limited to scrap breakdown/disposal, repacking and 5s (organization); Over time as required. To apply, please send resume to [email protected].

Assembly Operator 3rd Shift (11:00pm – 7:00am): Performs machine operations to support the assembly of parts following posted work instructions; Responsible to ensure accuracy of their own work according to work instructions and monitor the quality of the product; Detects and reports defective and/or questionable product conditions to the department supervisor; Detects and reports any unsafe conditions to the department supervisor and/or Environmental, Health & Safety Leader; Maintains the work area and equipment in a clean, orderly condition and follows prescribed safety regulations; Responsible for workplace safety and adhere to all plant safety rules; Work with others in the team to maximize efficiency and reduce scrap/downtime on the production line; Other duties may be assigned for example but not limited to scrap breakdown/disposal, repacking and 5s (organization); Over time as required. To apply, please send resume to [email protected].

Controller: Essential Job Duties and Responsibilities: Professional development and management of team members within Controlling department inclusive of accounting; Responsible for RAPA LP budgeting – budget planning, budget compliance and control of cost center budgets. Facilitates understanding of budget and analysis of budget gaps with the broader RAPA LP team; Forecasting and Preparation of financial evaluations and planning such as liquidity, loan and repayment plans and reconciliation of various accounts, especially banks; Planning and preparation of monthly, quarterly and annual financial statements, communication with auditors and financial partners; Maintaining Accounting System– ensuring robust and efficient processes, monitoring of all incoming and outgoing payments, including cash; Analyzes actual costs vs. standard cost and prepares periodic reporting comparing standard costs to actual production costs. (Target to Actual comparison); Creation of product and project calculations as well as cost breakdowns in alignment with RAPA Group Headquarters; Supports RAPA in analyzing changes in product design, raw materials, labor, manufacturing methods, or services provided, to determine effects on costs; Records cost information for use in controlling expenditures; Processing and support of all insurance; Drives improvement to KPI system in the form of the balanced scorecard; Support RAPA Group as needed with financial analysis and all tasks above; Close coordination with RAPA Group Headquarters to ensure alignment on financial tools and strategic planning; Other duties as assigned. To apply, please send resume to [email protected].

Lab Engineer: Essential Job Duties and Responsibilities: Main duty is to prepare, setup and perform functional and environmental testing of RAPA’s products as an internal service, mainly for Product Design Engineers and sometimes Quality or Production; Building and testing of prototypes; Accountable for maintenance and calibration of all R&D lab equipment; Planning and procurement of new lab equipment from simple hand tools to test rigs; Budget responsibility; Standardize laboratory activities between RAPA US and RAPA Germany; Responsible for cleanliness and tidiness of R&D lab; Support RAPA Germany activities towards ISO 17025 accreditation; Support series production in trouble shooting and failure root cause analysis; Perform LPAs at production lines; Other duties as assigned. To apply, please send resume to [email protected].

Quality Engineer: Essential Job Duties and Responsibilities: Implement, lead, and sustain Quality Management Systems to ensure effectiveness and compliance to the IATF16949 standard; Collect and analyze data, track and report metrics, and use to develop detailed action plans; Develop and implement continuous improvement initiatives that will improve key performance metrics, product quality, process capability, process control, and customer satisfaction; Achieve results through effective utilization of strategy deployment, lean manufacturing, 8D root cause analysis, PFMEA, and policy deployment; Manage and participate in preventive and corrective action activities, challenging the team to consistently implement accurate and effective solutions that address root cause; Manage issues to completion and audit to verify effectiveness and compliance; Serve as the site representative with customers, suppliers, and auditors; Assist in development, implementation, maintenance, and improvement of Management System, including document control, internal audits and corrective actions; Utilize continuous improvement tools including SPC, FMEA, Gage R&R, & structured problem solving; Participate in Kaizen activities to reduce PPM, total cost of quality, & improve manufacturability; Develop inspection methods, gages and be a key resource in optimizing inspection equipment utilization; Verify adherence to quality standards, procedures and product requirements; Lead identification of quality improvement opportunities, drive root cause analyses, and support quality improvement projects for reduction in PPM and cost of quality; Share knowledge of core tools and applicable continuous improvement methods with floor personnel (SPC, MSA, etc.); Other duties as assigned. To apply, please send resume to [email protected].

Regal Rexnord Corporation

Offers Power Transmission Gear Drives, Bearings, Couplings, Industrial Chain, Brakes, PT Drive Components and Conveying Solutions to enhance the reliability of equipment for various industries.

CNC Machinist: Under direct supervision, assists with the set up, operation, and adjustment of conventional or automatic machines such as Computer Numberic Controlled (CNC) machines. Works from drawings and written instructions to create replacement and new parts in making repairs to metal parts as well as for experimental apparatus or prototype equipment. Reads CNC programs. Work is routine and machining is performed to ordinary tolerances. Requires basic knowledge of various metals and of measurements used in machining processes. Typically requires a high school education or equivalent and two years of experience. Frequently reports to a Machine Shop Supervisor. Responsibilities include: Write/edit/modify programs for CNC Machines; Operates CNC machines according to exact tolerances specified on engineering prints; Sets up and operates manual lathes, saws, cutting tools, slotting tools to meet exact tolerances on engineering prints; Performs routine inspections and minor maintenance; Troubleshoots and corrects operational and quality issues; Ensures the machine is in compliance with operational and safety guidelines; Performs housekeeping duties as required; Meets all production standards; Run entire cell/area or multiple machines as a machinist. Apply here.

Quality Engineer: Responsible for design, development, implementation, and analysis of Quality processes, and systems. May develop a range of products or processes and recommends alterations to improve quality of products and/or processes. Requires a bachelor's and a minimum of 3 years of experience in the field or in a related area. Familiar with a variety of the field's concepts, practices, and procedures. Relies on experience and judgment to plan and accomplish goals. Performs a variety of complicated tasks. A wide degree of creativity and latitude is expected. Responsibilities include: Implement, lead, and sustain Quality Management Systems to ensure effectiveness and compliance to the ISO 9001:2015 standard & AS9100 REV D; Collect and analyze data, track, and report metrics, and use to develop detailed action plans; Develop and implement continuous improvement initiatives that will improve key performance metrics, product quality, process capability, process control, and customer satisfaction;  Achieve results through effective utilization of strategy deployment, lean manufacturing, root cause analysis, PFMEA, and policy deployment; Manage and participate in preventive and corrective action activities, challenging the team to consistently implement accurate and effective solutions that address root cause; Manage issues to completion and audit to verify effectiveness and compliance;  Serve as a site representative with customers, suppliers, and auditors; Assist in development, implementation, maintenance, and improvement of Quality Systems (ISO 9001:2015, AS9100 REV D), including document control, internal audits, and corrective actions; Utilize continuous improvement tools including SPC, FMEA, Gage R&R, & structured problem solving; Lead 6 Sigma projects and Kaizen activities to reduce PPM, total cost of quality, & improve manufacturability; Develop inspection methods, gages and be a key resource in optimizing inspection equipment utilization; Verify adherence to quality standards, procedures, and product requirements; Lead identification of quality improvement opportunities, drive root cause analyses, champion Lean and Six Sigma methodology and support quality improvement projects for reduction in PPM and cost of quality; Implement, lead, and sustain the PPAP process for certain customers. Apply here.

Shipping Coordinator: Verifies the accuracy of incoming and outgoing shipments and orders. Compares identifying information with bills of lading, invoices, orders or other records. Verifies that materials received are as ordered. May route incoming items within the company as directed. May utilize hand trucks, forklifts, hoists, conveyors, overhead crane, or other handling equipment to move material to and from and within the facility. HS Diploma or equivalent and 2 years experience. Apply here.

Revere Plastics Systems, LLC

Focuses on manufacturing plastic components for automotive.

Machine Operator: We are currently hiring for 1ST SHIFT-Monday-Friday (6:30am to 2:30pm); 2ND SHIFT-Monday-Friday (2:30 pm to 10:30 pm) and 3RD SHIFT-Monday-Friday (10:30 pm to 6:30 am). To apply, email resume to: [email protected].

Rice Signs, LLC

Manufactures signage for traffic and construction industries.

No current listings

SCA, Inc.

Manufactures plastic components for the automotive industry.

Quality Specialist: The Quality Specialist will maintain documentation, procedures and compliance related to ISO, IATF, PPAP and internal quality requirements; perform inspections as needed to ensure product quality; drive continuous improvement through QC processes; participate in the process of investigating & responding to customer complaints; review and qualify data; play an active role in quality improvement and organization. Excellent computer skills (Excel, Word, etc.). To apply, email resume to: [email protected].

Production Supervisor: The Production Supervisor is responsible for day to day management and scheduling of multiple production lines to ensure production goals are met; ensure production lines are operational and maintaining the ongoing production of product to include meeting quality standards and requirements; ensure new Team Members are trained; perform daily administrative tasks related to Time & Attendance recordkeeping and disciplinary action; report daily production numbers to Management; ensure health, safety and well-being of Team Members; Ability to stand for long periods of time (shift is 12 hours); strong organizational and computer skills; ability to complete daily reports, train and mentor Team Members. Day and Night Shift available. To apply, email resume to: [email protected].

Team Lead: The Team Lead will be responsible for ensuring new Team Members are trained; communicate daily expectations, assignments and responsibilities clearly and professionally to all Team Members; fill in on the production line as needed; ensure daily records are maintained to include production reports, Team Member sign in rosters, etc.; work with the Production Supervisor to ensure daily production goals are met while maintaining quality, health and safety standards; Ability to stand for long periods of time (shift is 12 hours); strong organizational skills; Day and Night Shift available. To apply, email resume to: [email protected].

Operators (Assembly & Injection Molding): Operators needed for 12 hour shift (day and night available). Ability to stand for extended periods of time, perform hand and machine assembly processes, use hand tools, perform inspection processes, meet production and quality standards. Follow health, safety and environmental established policies. To apply, email resume to: [email protected].

SCA Innotive

Manufactures plastic components for the automotive industry.

Assembly Team Member (Lower Glue, Press, Filter): Essential duties and responsibilities: Must be able to perform repetitive motion in an assembly process; Assembly work requires standing for extended periods of time, no sitting permitted; Team Member must be able to lift 40 pounds without assistance; Assembly work requires continuous movement; twisting, bending, walking; Assembly work requires Team Members to have good eye/hand coordination; Assembly work checks for damages and defects and monitors quality closely; This job description in no way implies that these are the only duties to be performed. An employee will be required to follow any other job-related duties required by the manager. To apply, email resume to: [email protected].

Schmidt Automotive USA, L.P.

Offers automated machining and assembly of powertrain components for the automotive industry.

CNC Operator: Machines parts by programming, setting up, and operating a computer numerical (CNC) machine; will ensure that all high automotive quality standards are met; will ensure that production goals are met; will keep records; will maintain equipment and supplies; will communicate with co-workers to ensure an efficient production, will maintain a clean, organized and safe work environment so that the highest level of product quality is guaranteed. To apply, please email resume to: [email protected].

Coordinate Measuring Machine (CMM) Technician: The CMM Technician will assure the quality of manufactured parts and assemblies through advanced quality planning analysis, measurements and control techniques. Job purpose/scope: To assure dimensional conformity through full dimensional layout utilizing various gages, measurement equipment and software. Job Duties/ Responsibilities: Perform layout inspection using the Coordinate Measuring Machine (CMM), contour system, various variable and attribute gauges or surface plate measurement techniques; Perform analysis such as force testing, visual conformity, and raw material verification for plastic injection molding; Assure accurate QA Sample Inventory records are maintained via gage management software and calibration; Assure timely verification of all tooling changes and/or corrections; Perform statistical analysis as deemed necessary by the Quality Manager; Provide accurate and timely Layout Reports; Reading and interpreting blueprint requirements and basic process and product acceptance standards; Software and computer literacy; Coordinate Measuring Machine Programming/Operation; Surface plate inspection; Ability to work with CAD models; Thorough knowledge of Geometric Dimensioning and Tolerancing (GD&T). To apply, please email resume to: [email protected].

Seohan Auto USA/Seohan-NTN Driveshaft USA Corporation

Provides automated machining and assembly of axles and driveshafts for the automotive industry.

No current listings

Shinhwa Auto USA Corporation

An aluminum die casting and machining operation for the automotive industry.

Assembly Operator: Remove finished metal products from the conveyor belt; Sort and pack products into a container; Perform visual inspection on products produced; Periodically checks products, per company policy, to ensure quality and uniform completion; Resolves any identified problems and alerts supervisor. To apply, please email resume to: [email protected].

Casting Operator: Observe continuous operation of automatic machines to ensure that products meet specifications and to detect jams or malfunctions, making adjustments as necessary; Operate or tend to casting machines; Inspect metal products; Measure dimensions of completed products or workpieces to verify conformance to specifications; Monitor equipment operation to ensure that products are not flawed; Operate metal forming equipment; Adjust temperature controls of heating equipment. To apply, please email resume to: [email protected].

Melting Operator: Sets-up and operates die-casting machine to melt aluminum parts; Preheats die sections with torch or electric heater; Inspect castings using fixed gauges; Load metal ingots into melting furnace and transfer molten metal to heated reservoir of die-casting machine using hand ladle; Operate forklift to transport melted aluminum to casting area. To apply, please email resume to: [email protected].

Maintenance Technician: Maintain and repair machines, mechanical equipment, and buildings; Fix or replace faulty electrical switches, outlets, and circuit breakers; Inspect and diagnose problems and figure out the best way to correct them; Perform routine preventive maintenance to ensure that machines continue to run smoothly; Assemble and set-up machinery or equipment; Do general cleaning and upkeep of buildings and properties; Order supplies from catalogs and storerooms; Meet with clients to estimate repairs and costs. To apply, please email resume to: [email protected].

Mold Maintenance Technician: Read technical manuals to understand equipment and controls; Disassemble machinery and equipment when there is a problem; Repair or replace broken or malfunctioning components; Perform tests and run initial batches to make sure that the machine is running smoothly; Detect minor problems by performing basic diagnostic tests; Test malfunctioning machinery to determine whether major repairs are needed; Adjust and calibrate equipment and machinery to optimal specifications; Clean, lubricate, and move machinery and equipment; Keep machines in working order by detecting and correcting errors before the machine or the products it produces are damaged; Use technical manuals, their understanding of industrial equipment, and observation to determine the cause of a problem; After diagnosing a problem, may take the equipment apart to repair or replace the necessary parts. Once a repair is made, test a machine to ensure that it is operating correctly; Use lathes, grinders, drill presses, and welder; Perform basic maintenance and repairs on machines; Must follow machine specifications and adhere to maintenance schedules; Use a variety of tools to do repairs and preventive maintenance. To apply, please email resume to: [email protected].

Quality Inspector: Examine products or work to verify conformance to specifications; Recommend adjustments to the assembly or production process; Inspect, test, or measure materials or products being produced; Measure products with rulers, calipers, gauges, or micrometers; Operate electronic inspection equipment and software; Accept or reject finished items; Remove all products and materials that fail to meet specifications; Report inspection and test data such as weights, temperatures, grades, and quantities inspected; Demonstrated initiative, ability to work with others, and good professional judgment; Ability to work independently and organize time effectively. To apply, please email resume to: [email protected].

Sio2 Medical Products, Inc.

Manufactures medical labware and consumables across the healthcare spectrum.

No current listings

Sodecia Automotive Auburn, L.P.

Manufactures metal components for the automotive industry.

No current listings

Straehle + Hess USA, Inc.

Manufactures customized textile applications for the automotive industry.

Development Engineer: Control and monitoring of product developments in responsible product area, maintaining economic efficiency, protecting the environment, and analyzing production capacities; Responsible for technical product developments and maintaining high quality in responsible areas; Utilizing internal processes and systems; Releasing product specifications and tolerances; Ensuring creation of functional specifications for projects in responsible product areas; Maintain overview of ongoing customer inquiries in the responsible product area in regards to project development, resources, and deadlines; Planning, structuring, and coordinating all activities that affect responsible product area; Ensuring calculations and determining specific characteristics in the context of developing projects; Active participation of the product area in the KVP process; Ensuring cooperation in the implementation of new manufacturing processes as part of product developments in the responsible product area; Responsible for the analysis, tracking, and achievement of product cost targets in terms of design-to-cost procedures. To apply, please email resume to: [email protected].

Quality Engineer: Responsible for quality control; Support to keep up and improve the HQ quality system on site; Support to implement quality related customer specific requirements if agreed; Initiate and implement quality improvement projects; Contact for customers and suppliers regarding quality issues; Plans, promotes and organize training activities related to product quality; Ensure production of products is consistent with established quality standards; Support manufacturing to achieve all legal environmental and job safety compliance regulations; Contact for external audits; Release Date 05/22/2015 Rev: 1.0 FBF5-2-05; Conduct internal process audits; Maintain and update control plans and FEMA; Support production of maintain and update of related standard documents; Planning, coordination and directing the quality control program; Statistical analyses of quality data; Conduct and moderate root cause analysis; Initiate and monitor corrective and preventive actions; Ensure inspection and testing capability; Support all laboratory activities; Supports production of products consistent with established quality standards. To apply, please email resume to: [email protected].

Sales Engineer: Acquisition of new business to expand the market position with constant optimization of profit Operationally and strategically supporting the Chief Sales Officer; Participation in international optimization measures and problem-solving across interfaces; Participation in the defining measures to achieve annual and strategic goals; Negotiations and communication with customers; Remain updated on the market; Responsible for the effective on-boarding of new clients; Benchmark to make strategic sales decisions; Monitor competitors; Ensuring calculations and determining specific characteristics in the context of developing projects; Active participation of the product area in the KVP process; Define new sales strategies and priorities; Maintain long term relationships with customers; Utilize technical knowledge of products and the customer’s own process to generate product presentations, including physical product samples, and offer guidance based on the customer’s needs; Create of general and introductory organization presentations to demonstrate capabilities and portfolios; Conduct price negotiations in consultation with CSO; Process customer requests and acquisition of strategic projects; Organization a standardized procedure regarding implementation and documentation within; the sales department; Tracking of ongoing projects; Creation and alignment of project timeline for the customer, suppliers, and the organization; (internally and externally), including the launch and end of the project; Observance and compliance with legal requirements and environmental regulations, as well as safety regulations; Reviewing customer-specific requirements and contracts. To apply, please email resume to: [email protected].

SwiftSku

Helps independent convenience store owners onboard their c-store with the latest technology to leverage promotional discounts and increase revenue with State of the Art Business Intelligence.

No current listings

Tennibot, LLC

Manufactures robotic tennis ball collectors.

Manufacturing & Supply Chain Manager: You will be responsible for managing activities that include but are not limited to maximizing supplier performance, leading cost savings, and negotiating purchase agreements and contracts which include pricing, terms, conditions, risk mitigations, and warranties. Apply at the careers section of our site here.

Mechanical Engineer: Responsible for designing parts, mechanisms, and mechanical components. You will also develop and execute test plans to ensure that our products meet their performance & reliability requirements at the design and production phases. Apply at the careers section of our site here.

Deep Learning Engineer: You will be responsible for activities that include (but are not limited to) developing and evaluating deep-learning algorithms that will be used in different Tennibot products. The ideal candidate is comfortable working in a dynamic, fast-paced environment and has grounded experience in product development. Apply at the careers section of our site here.

Electrical Engineer: You will be responsible for activities that include (but are not limited to) designing, prototyping, and testing PCBs, as well as working with suppliers to source components. The ideal candidate is comfortable working in a dynamic, fast-paced environment and has grounded experience in product development. Apply at the careers section of our site here.

Thermo Fisher Scientific, Inc.

Manufactures plastics packaging for the medical and dairy industries.

Drug Line Material Handler (12 Hour Night Shift & 12 Hour Day Shift): Responsibilities include - Gathers materials and supplies needed for Drug Line operation to comply with approved procedures. Loads hoppers with vials and poker chip as needed. Orientating and stacking of cups into cup hopper. Performs visual inspection on all materials used and report problems to the Drug Kit Supervisor. Documents all materials to comply with Drug Line approved procedures. Helps remove trash at end of shift. Performs any tasks necessary to help complete production. If you have an interest in applying, please go to Thermofisher.com and look for the job opportunities link.

Maintenance Technician (12 Hour Night Shift): Performs non-routine maintenance on injection molding presses. Troubleshoots presses when problems occur which could include hydraulics, penumatics and mechanical fixes. Assist and/or fill in for automation technician when necessary. Fills in for floor maintenance as needed. Records mold and press maintenance. Assist in automation repair/changeover when needed. Performs quality checks and machine adjustments as needed to maximize product quality, rates of production, etc. Communicates directly with Maintenance Manager throughout the shift with updates about ongoing problems and projects. Assists building mechanic with machine spare component inventory. Preventative maintenance – maintaining cleanliness and performance of machines. Performs other duties as requested by Department Manager. If you have an interest in applying, please go to Thermofisher.com and look for the job opportunities link.

Mold Operator/Material Handler (12 Hour Day Shift & 12 Hour Night Shift): Responsibilities include - Stock molding rooms with necessary supplies during shift and at the end of shift before shift change; Immediately notifies maintenance/processing of any quality or downtime issues; Pulls full boxes/crates from under machines; Inspects parts for any defects or quality issues before closing box/crate; Close all boxes/crates, weigh, apply label and stage; Bring in any colorant or resin, as directed by production supervisor; Moves all finished products to holding areas; Sort quarantine created by your assigned machines, when time permits; Removes and weighs all scrap by product and submits to supervisor on scrap log sheet; Keep assigned machines clean including the floor under and around machines; Takes all trash to dumpster; Cover for other Mold Operator during breaks; Assures all documentation and labeling is correct on all presses daily; Pulls samples and submits to lab as required; Performs other duties as requested by Production Supervisor or Molding Department Manager. If you have an interest in applying, please go to Thermofisher.com and look for the job opportunities link.

Mold Setter (8 Hours Monday - Friday): The Mold Set-Up Technician is responsible for the safe and proper handling of molds including Communication with Production Manager, Maintenance Manager, Process Engineer on needs and requirements for getting setup completed so startup can occur in timely manner. If you have an interest in applying, please go to Thermofisher.com and look for the job opportunities link.

Process Engineering Technician (12 Hour Night Shift): Responsible for assigned process assignments with our injection molding machines, monitoring of the machines process parameters and assist in maintaining those parameters. If you have an interest in applying, please go to Thermofisher.com and look for the job opportunities link.

Webster Fulfillment

Provides warehousing and distribution for E-Commerce companies as a 3rd party logistics provider.

Fulfillment Center Shipping Associates: Currently seeking: shipping associates who are responsible for gathering orders and preparing items for shipment to customers nationwide. We support retailers from an order fulfillment standpoint and support their shipping demands. Responsibilities include: Receive, inspect, bag, and tag our new arrivals with speed, efficiency, and accuracy; Pull and ship orders that are bound for our fabulous customers; Organize the warehouse while coming up with new ways to improve our processes; Be available to complete various tasks in the day related to shipping/receiving/inventory management. To apply, please email resume to [email protected]. A great opportunity for high school/college students, parents, or anyone looking for an accommodating schedule, part time or full time hours, and a pleasant workplace.

Winkelmann Flowform Technology, L.P.

Manufactures parts for the aerospace, defense, and industrial applications.

No current listings

Younchang

Manufactures metals for the automotive and non-automotive industries.

No current listings